Cracking Moment Equation

Reading Time: 3 minutes

Cracking moment equation is a famous formula that gives you the value of tensile bending stress at which the concrete of the beam starts to crack. This concept is important to understand the stress distribution of the beam across the depth. It will also help you to determine the deflection in the concrete at the point of failure.

But for deflection calculation you can’t use the gross moment of Inertia (Ig) because of cracking effect. So, instead you have to use the effective moment of inertia (Ie) which provides transition between the upper and lower bounds of Ig and Icr.  However, for Ie you have to determine the Mcr which is the cracking moment.

Establishing the Cracking moment Equation

Let’s now derive its formula

Step No. 1 – finding modulus of rupture

But first you have to establish an equation for the modulus of rupture (MOR) of concrete. Modulus of rupture is the tensile flexural strength of the beam and it shows the amount of stress and force an unreinforced concrete can resist before bending failure. It is written as fr and has been established by ACI 318-14 in equation 19.2.3.1 as:

fr =7.5lfc’ (in psi )

or

fr =0.7lfc’ (in MPa)

where fc’ is the compressive strength of the concrete while l is the factor for the light or normal weight concrete. For light weight concrete, the modulus of rupture is further reduced as you have to multiply the above equation with 0.75.

Step No. 2 – Finding the distance of extreme fiber of the tension side

From stress distribution of the rectangular beam we know the maximum bending stress is at the extreme fiber from the Neutral Axis (NA). So, for rectangular section, neglecting the effect of reinforcement we can say

Yc = h/2

Step No. 3 – Finding Gross moment of Inertia

The gross moment of inertia is for the rectangular section bh3/ 12 hence,

Ig = bh3/12 where b is the width of the concrete beam and h is the height.

Step No. 6 – finding cracking moment

Now by using the formula of bending stress from Neutral axis as per the elastic beam theory we can write:

f = My / I

Where

 f is the bending stress at fiber of y distance

M is the moment applied

y is the distance from the neutral axis

I is the moment of inertia for beam

Now using below calculated values we can write as:

M = (f x I )/ y

Or

Mcr = (fcr x Ig ) / yc

Hence the above the is cracking moment equation.

 

David Noah

Howdy, I’m Noah Although I don't like all this internet thing but I love sharing my stories on the roof here. With my years of experience in number of roofing contractors across various boroughs of Florida, I'm here to answer all your roofing questions. I'm really honored to have you on my website browsing through our articles and hope you'll enjoy your visit and find my content helpful in every situation. You can contact me right away to discuss any of your roofing problem.

2 thoughts on “Cracking Moment Equation”

Leave a Reply to Torque and Hammer Pile Driving LTD. Cancel reply